Digitus DS-14210 Spécifications télécharger pdf (Page 30)

DIGITUS

KVM Switch Module for modular based TFT consoles

Troubleshooting

Ensure that all cables are well seated. Check that keyboard/mouse cables are not

swapped. Label and bundle the cables for each computer to avoid confusion when

connected to the DIGITUS®.

Symptom Possible causes Recommended solutions

Nothing works

Bad connection at the

C-36 connectors.

Push the assembled dr

awer and the KVM

odule box firmly together leaving only

8mm (5/16 inch) space in between. Be

sure they are secured by two screws.

VGA monitor works fine

but keyboard and touch

pad does not work.

Another keyboard or

mouse is connected to

the rear side of

the KVM

odule box (marked with

Local) when the C-

connector is connected to

the KVM drawer.

Connection inside the

KVM drawer becomes

loose due to vibration.

If the C

36 connector on the KVM

odule

box connects to a KVM drawer, its Local

console shoul

d not connect to any

keyboard or mouse.

Verify if the KVM drawer is bad by

disconnecting it from the KVM M

odule

box (the C-

36 connector is not

connected). Connect a keyboard,

mouse, and monitor to the Local

port on

the KVM M

odule box and another

computer to any of the PC

ports and use

the KVM Module box as a stand-

alone

KVM Switch.

The quality of video is

bad or the picture is

grainy

Video card quality

1. Choose a colorful Desktop Wallpaper

for the following adjustments.

a. Press to bring up the

OSD menu,

select Color, and then select Auto Color.

After done the Auto Color job, simple

press to exit the OSD.

b. Press and hold to run Auto Tuning

for the optimal screen display.

No screen image, or no

OSD menu

A power

on computer is

not selected.

External power supply is

not connected,

No power

to DIGITUS®.

Turn on a computer and select it by the

front push-buttons.

Apply power to the system via the

external power supply. Press the front

push buttons to select a computer. A red

ctangle, part of the OSD function,

should pop up displaying the port number

as the system is properly powered.

onnect a VGA monitor to the LOCAL

por

t at the rear and check if the VGA

signal presents.

1 2 ... 25 26 27 28 29 30 31 32 33

Commentaires sur ces manuels

Pas de commentaire

Digitus DS-14210 Spécifications Page 30

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs KVM Digitus DS-14210