Digitus DS-72402GE Fiche technique

19" TFT LCD CONSOLE WITH KVM SWITCH (8-PORT/16-PORT) User Manual DS-72303GE / DS-72303US DS-72402GE / DS-72402US

- 10 - 7. Power on the PC. Note It is not necessary to power down the whole system for install a new PC or KVM thereafter. All you need is

- 11 - OPERATION Port Selection The LCD KVM provides fours switching methods: Manual Key, Hot Key, Mouse Clicking and OSD. • Manual Key It i

- 12 - • Operation You can operate the options by keyboard or mouse. For the keyboard operation, besides the common Up and Down keys, there a

- 13 - 1. This field provides the information of the currently connected PC. As shown in the figure above, 03 refers to the Port Number of the Master

- 14 - 4. Instruction Hint Field:  ↑↓: Move; Use the ↑↓ keys on the keyboard or the mouse to move the selection bar. SPACE: Edit; The “Spac

- 15 - Item Description Default Other SelectionChannel Display Mode For Port Switching, Auto Scan and OSD Close, the Monitor will show the Channel inf

- 16 - • Auto Scan Mode: You can start the OSD first and press “F4” to enter the Auto Scan Mode. If you want to scan the PC, you must use the Smar

- 17 - TROUBLESHOOTING Confirm whether or not the cable is good and connected properly Q1 : What should we do if the keyboard has no response? A1a: R

- 2 - LCD MONITOR SPECIFICATIONS Size 19 inch Screen Type TFT Contrast 700:1 Brightness 300 cd/m2 View Angle 160° Resolution 1280x1024@75Hz Response

- 3 - OSD Control Function List 1. Color: Contrast Brightness Color Adjust Color Temp.: 9300, 6500, 5800, 5RGB, USER Exit 2. Image Setting: Clock Ph

- 4 - BRIEF INTRODUCTION The KVM Switch allows you to control several sets of personal computers by a keyboard, a mouse and a monitor. In the mean

- 5 - FEATURES ‧ The keyboard, mouse and 19” LCD monitor were built-in on the KVM switch. ‧ Standalone machine controls up to 4/8/16 sets of PCs. ‧

- 6 - SPECIFICATIONS 8-port 16-port CPU Connecter 3-in-1 HD-15 (Female) 8 16 Console Connector Monitor 19” TFT LCD Mouse Touch pad module Keyboar

- 7 - CONFIGURATION 8-Port Front View 16-Port Front View 1. Port Selection Switches Press the push button to directly switch to the corres

- 8 - 8-Port Rear View 16-Port Rear View 1. CPU Port Install the cable connected to a PC here. 2. Update Port The port provides a firmwar

- 9 - INSTALLATION • Standalone 1. Make sure that the power switch at the rear panel of the KVM is OFF. Plug an end of the AC power cord into the K